OPERATE AND MAINTAIN CHAINSAWS - TRAINING COURSE
The Treetec chainsaw training course is suitable for anybody engaged in chainsaw use: tree contracting, personal use, council workers, Parks management, workplace supervisors, agriculture, firewood collection, landscaping, ecology, SES, CFA, 4WD enthusiasts etc
'Operate and Maintain Chainsaws' (AHCMOM213) is a nationally recognised unit of competency and successful participants are issued a certificate of competency from The Management Edge (TME) - a Registered Training Organisation (RTO #3937).
The course used to be called 'Chainsaw Level 1', AHCARB205A and is equivalent to FPICOT2239A - Trim and Cut Felled Trees
If you or your staff are using chainsaws within a work environment this competency provides a certificate that demonstrates you have provided appropriate training for ground based chainsaw use as required under the OHS Act.
Upcoming dates for the open chainsaw training course:
24th May (Fri) Menzies Creek
14th June (Fri) Menzies Creek
28th June (Fri) Menzies Creek
Please call or email us to check on training availability, book a spot or to schedule a group chainsaw course.
If you would like to reserve a spot in an open chainsaw course we'll need your details and payment:
Once booked we'll send you some reading material and confirmation of the exact location, start times, what to bring etc.
TOTAL FIRE BANS - On days of total fire ban the course will be postponed for safety reasons, we will have a backup day scheduled and we ask you to keep this day free also.
Each student is required by the government to have a Unique Student Identifier (USI) this takes about 8 minutes and is arranged at this web site: www.usi.gov.au
Please note that all of our courses are comprehensive, they can also be demanding, we ensure participants are competent before we will issue a certificate of competency. Students need to prepare properly well before the training day, ensuring the chainsaw theory work has been completed and understood.
Specialised chainsaw training
Some companies use chainsaws for specific tasks only and our training can be tailored to your needs, ensuring we cover those requirements for a specific workplace in detail, eg timber yards, waterway constructions or fencing contractors.
Duration / class size
Duration is 1 (contact) field day, this must be preceded by approximately 4 - 8 hours of preparation.
Treetec training is comprehensive, class size is limited to small groups to enable the course to be completed quickly and everyone to recieve appropriate supervision and attention. Prior to attending all students must read and understand the theory material supplied.
One day chainsaw training
To achieve competency for the course: 'Operate and Maintain Chainsaws' students will need to do more than the 8 hour training day to cover all material. Often chain saw training is run as a one or two day course with groups of 8 to 10 students, however at Treetec we keep our groups small; 4 or 5 students maximum, avoiding students losing valuable time waiting for other participants to demonstrate skills or to be assessed. This means we can cover the practical material in a single day. Students are required to do some pre-course reading and study on chainsaw theory and OHS. This way we spend more of the training day focussed on developing hands on skills. The course is comprehensive and both the theory and practical components will need to be learnt in order to complete and pass the training.
$445 per person - open courses
Group bookings - $1760 (4 students), $2090 (5 students)
We are able to provide onsite training for companies and other organisations, there may be a travel component depending on location. call or email to discuss details and a firm quote.
Training outcome / certificate
Students who successfully complete the chainsaw course will be issued with a nationally recognised certificate of competency from The Management Edge (TME) Registered Training Organisation (RTO). This certificate will count toward a qualification in Horticulture (Arboriculture)
(See 'Introduction to Chainsaws' below for non certification training)
Students must read and learn the information contained in the attached PDF document.
Chainsaw students will also need to complete the supplied applicaton form with a USI (see below)
Unique Student Identifier - USI
The government has introduced the Unique Student Identifier (USI) system. If you are undertaking a nationally recognised training course you will need to have a USI. This is a Government requirment and a certificate of competency cannot be issued by the Registered Training Organisation (RTO) until this number is supplied to the RTO.
The number is easy and quick to obtain by filling in the USI form at this website: www.usi.gov.au
Most open chainsaw courses are run in Officer (near Berwick), or The Dandenong Ranges area. We are based in Melbourne and deliver training Australia wide (travel expenses apply), We can be flexible depending on student location and available facilities.
If you have a suitable location and would like us to run a course in your area let us know, you may have a group of four or five people or we may know of others in your area planning to do the training.
We run various other courses Australia wide, this is usually for specialist skills aranged as a group booking.
Students should provide their own PPE including Helmet with ear protection, Australian Standard eye protection, protective cap boots and chaps or chainsaw pants and gloves
If you do not have protective chainsaw chaps we can supply them as well as protective headware.
Students MUST have protective glasses and protective toe boots, either steel cap or a composite cap boot, this does not simply mean a leather work boot or hiking shoe, it means a hard capped boot commercially made specifically to withstand loads and / or cutting. If a student is not wearing them they will not use a saw at the course and will unfortunately not be eligible for assessment.
If you have access to a chainsaw then bring it to the training course, old, unsafe saws in poor condition make a great teaching aid, we supply modern, professional Husqvarna chainsaws for all students to use if they choose.
Our focus is hands on, practical chainsaw skills and knowledge and this is where most of our time is spent, with the majority of training done in the field, some sections of the training may be done in a classroom but usually outdoors - depending on weather. Training is kept flexible and the groups are small to ensure we allow for individual needs. To keep the training time down, we provide a chainsaw theory document that must be learnt prior to attending.
The theory component is comprehensive and mandatory, it is essential that students allocate adequate time well in advance of the training field day to learn this material.
Chainsaw refresher course
For those organisations who need to ensure all workers are operating properly and are up to date with the latest information relating to chainsaw use we run chain saw use refreshers. Please contact us to discuss details and a quote.
Normally a chainsaw refresher course can have up to 10 participants and takes half a day.
A refresher course is required as and when your organisation deems it appropriate from a risk perspective. Some contracts will require a 3 year or 5 year refresher for all chainsaw operators.
Introduction to Chainsaws
We offer an abbreviated chainsaw course, this suits people who don't necessarily require a certificate of competency. This training covers most aspects of the full certificate course but does not allow enough time to cover a full assessment including written tests. Also some lower priority knowledge or skills that can take a little longer to learn may have restricted time allocated.
These courses are usually arranged by community groups, clubs and councils who will find interested participants to book as a group.
$1390 - maximum of 8 participants
One on one training
If there are special requirements or time constraints we are able to provide single person or small group chainsaw training tailored to your needs, prices are adjusted accordingly. This may also incorporate specialist knowledge such as Tree Felling, Pruning or Tree Climbing if required.
For more information or a quote please email, phone or complete the form below:
Phone: 03 8644 8005
Modern Husqvarna chainsaws supplied for all Treetec training courses
Ecologists practicing saw skills
Learning crosscut and boring techniques
Chainsaw sharpening and maintenance
© Copyright 2018 Treetec - Tree Arborist / Ecologist Melbourne | We service Victoria, NSW, SA, QLD and Tasmania for tree and ecology consulting, chainsaw courses and Occupational Health and Safety. Our local area for tree treatements such as Elm Leaf Beetle includes all areas of Melbourne and country Victoria, Dandenong Ranges, Yarra Valley, Gippsland, Shire of Yarra Ranges. Not to be confused with Treetech or Tree tech or treetec.com.au